To properly install a bitumen roofing membrane, the surface must be clean, dry, and free of any debris. The membrane should be rolled out carefully, ensuring it is flat and without any wrinkles or bubbles. It should then be secured in place using mechanical fasteners or adhesive, following the manufacturer's guidelines. Finally, the seams should be properly overlapped and sealed to prevent any water infiltration. **

The bitumen roofing membrane is correctly installed by first preparing the roof surface by ensuring it is clean and free of any debris. The membrane is then rolled out and positioned on the roof, ensuring it overlaps correctly to provide a watertight seal. The membrane is then secured in place using mechanical fasteners or adhesive, depending on the specific installation instructions. Finally, the seams and edges are sealed with additional bitumen or sealant to prevent any water infiltration. **

Resitrix roofing membranes are installed on bitumen membranes using a method called hot-air welding. First, the bitumen membrane is cleaned and prepared for installation. Then, the Resitrix membrane is rolled out and positioned over the bitumen membrane. The two membranes are then heated with a hot-air gun, which melts the bottom layer of the Resitrix membrane and fuses it to the bitumen membrane. This creates a strong, watertight bond between the two membranes, providing a durable and long-lasting roofing system. **

To apply a new waterproofing membrane on top of an old bitumen waterproofing membrane, the surface of the old membrane should be thoroughly cleaned and prepared. Any loose debris, dirt, or old adhesive should be removed to ensure proper adhesion of the new membrane. Once the surface is clean, a primer should be applied to promote adhesion between the old and new membranes. Finally, the new waterproofing membrane can be installed according to the manufacturer's instructions, ensuring that it is properly sealed and bonded to the old membrane to provide effective waterproofing. **

Bitumen itself is not considered toxic, as it is a naturally occurring substance. However, exposure to bitumen fumes or dust can be harmful to human health, as it may cause irritation to the skin, eyes, and respiratory system. Additionally, prolonged exposure to bitumen fumes may increase the risk of developing certain types of cancer. It is important to take proper safety precautions when working with bitumen to minimize the risk of exposure. **

Bitumen is produced through a process called fractional distillation, which separates crude oil into its various components based on their different boiling points. During this process, the heaviest and thickest components of crude oil, including bitumen, are separated and collected. Bitumen can also be produced through a method called steam distillation, where steam is injected into the crude oil reservoir to heat and separate the bitumen from the surrounding rock. Once extracted, bitumen is further processed and refined to remove impurities and produce the final product used for various applications such as road construction and waterproofing. **

For the roof of a wooden garden house, a bitumen roofing membrane with a reinforced base, such as a fiberglass or polyester mat, would be suitable. This type of membrane provides added strength and durability, which is important for withstanding the elements and potential foot traffic on the roof. Additionally, a self-adhesive or torch-applied bitumen membrane would be easier to install on a wooden roof compared to a mechanically fastened membrane. Lastly, a membrane with a granulated surface can provide additional protection and aesthetic appeal for a garden house roof. **

Yes, bitumen can be painted over with certain types of paint. However, it is important to properly clean and prepare the surface before painting to ensure adhesion. It is recommended to use a paint specifically designed for use on bitumen surfaces to achieve the best results and long-lasting finish. Additionally, it is advisable to consult with a professional to determine the most suitable paint and application method for your specific project. **